id3D

Komunitas 3D Printing Indonesia

WPT 3D Printer diluncurkan di Indiegogo mulai dari $499

by · Published · Updated

Banyak 3D Printer baru yang membuka jalannya ke pasaran, sangat bergantung pada situs – situs seperti Kickstarter dan Indiegogo. tidak seperti 5 atau 6 bulan yang lalu. dibutuhkan banyak usaha untuk mendapatkan dana,  produsen harus benar- benar menonjol jika ingin menarik konsumen.

Sebuah perusahaan bernama Inovawt yang dipimpin oleh William Gueybaru saja meluncurkan Indiegogo Crowdfunding Campaign untuk 3D Printer WPT nya, dalam upaya untuk meningkatkan $ 60.000 untuk memulai produksi. Printer ini akan sangat bergantung pada harga yang terjangkau (mulai dari $ 499 untuk pendukung awal), dan volume produksi yang besar untuk menarik perhatian pihak – pihak lain.

berikut spesifikasi printer WPT ini :

 

  • Printer Size: Width: 43cm (16.9”), Length: 43cm (16.9”), Height: 34cm (13.4”)
  • Printer Weight: 17kg
  • Build Envelope: Width: 250mm (~9”), Length: 250mm (~9”), Height: 300mm (~12”)
  • Print Speed: Up to 400mm/sec
  • Filament Type/Size: PLA, ABS, Nylon, 1.75mm
  • Nozzle Diameter: 0.4mm
  • Min Layer Height: 45 microns
  • Later Resolution: Between 100 and 300 micron layer resolution
  • Positioning Accuracy: 15 micron X and Y

New 3D printers continue to make their way to market, relying heavily on crowdfunding sites such as Kickstarter and Indiegogo. Unlike five or six months ago, it takes a whole lot to get funded. In a market saturated with printers which are basically rebranded versions of each other, manufacturers really need to stand out if they wish to appeal to consumers.

This is what one company called Inovawt, led by a man named William Guey is trying to do. Guey has recently launched an Indiegogo crowdfunding campaign for his WPT 3D printer, in an effort to raise $60,000 to begin production. The printer, which will rely on its affordable price (starting at $499 for the earliest backers), and large build volume to hopefully attract interested parties, features the following specifications:

  • Printer Size: Width: 43cm (16.9”), Length: 43cm (16.9”), Height: 34cm (13.4”)
  • Printer Weight: 17kg
  • Build Envelope: Width: 250mm (~9”), Length: 250mm (~9”), Height: 300mm (~12”)
  • Print Speed: Up to 400mm/sec
  • Filament Type/Size: PLA, ABS, Nylon, 1.75mm
  • Nozzle Diameter: 0.4mm
  • Min Layer Height: 45 microns
  • Later Resolution: Between 100 and 300 micron layer resolution
  • Positioning Accuracy: 15 micron X and Y

wpt3

Source : 3Dprint.com

You may also like...